Simpson Strong-Tie Type 2 Stainless Steel Wire Wall Tie 225mm
Simpson Strong-Tie Type 2 Stainless Steel Wire Wall Tie 225mm
(Approx. 3-5 working days)
Do you have a MacBlair trade account?
The Simpson Strong-Tie WTS2-225 is a 225mm Type 2 stainless steel wire wall tie designed for masonry-to-masonry connections. It provides lateral support across wall cavities ranging from 76mm to 100mm. This tie is suitable for general-purpose applications in domestic and small commercial buildings up to 15m in height.
During bricklaying, the wall ties are embedded directly into the mortar joints of both the inner and outer masonry leaves. A minimum embedment of 50mm is required on each side to ensure structural integrity, with typical site installations achieving between 62.5mm and 75mm. Standard installation requires a density of at least 2.5 ties per square metre, typically spaced at 900mm horizontal and 450mm vertical centres, staggered across the wall area.
Made from austenitic stainless steel, the WTS2-225 provides intrinsic corrosion resistance for long-term structural stability. It is classified as an M2 (iv) tie, suitable for use in flat sites with a basic wind speed up to 31m/s and an altitude of up to 150m above sea level.
- Designed for cavity widths between 76mm and 100mm for accurate specification.
- Made from austenitic stainless steel to provide strong corrosion resistance.
- Requires a 50mm minimum embedment in each masonry leaf for structural safety.
- Achieves a declared tensile load capacity of 1800N under standard testing.
- Suitable for domestic buildings up to 15m in height in standard flat locations.
| Brand | Simpson Strong-Tie |
|---|---|
| Length | 225 mm |
| Model Name / No | WTS2-225 |
| Sold Per | Tie |
| Pieces per m² | 2.5000 |
| To suit cavity width | 76mm - 100mm |
| Wall Height Suitability | 15 m |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.
The Simpson Strong-Tie WTS2-225 is a 225mm Type 2 stainless steel wire wall tie designed for masonry-to-masonry connections. It provides lateral support across wall cavities ranging from 76mm to 100mm. This tie is suitable for general-purpose applications in domestic and small commercial buildings up to 15m in height.
During bricklaying, the wall ties are embedded directly into the mortar joints of both the inner and outer masonry leaves. A minimum embedment of 50mm is required on each side to ensure structural integrity, with typical site installations achieving between 62.5mm and 75mm. Standard installation requires a density of at least 2.5 ties per square metre, typically spaced at 900mm horizontal and 450mm vertical centres, staggered across the wall area.
Made from austenitic stainless steel, the WTS2-225 provides intrinsic corrosion resistance for long-term structural stability. It is classified as an M2 (iv) tie, suitable for use in flat sites with a basic wind speed up to 31m/s and an altitude of up to 150m above sea level.
- Designed for cavity widths between 76mm and 100mm for accurate specification.
- Made from austenitic stainless steel to provide strong corrosion resistance.
- Requires a 50mm minimum embedment in each masonry leaf for structural safety.
- Achieves a declared tensile load capacity of 1800N under standard testing.
- Suitable for domestic buildings up to 15m in height in standard flat locations.
| Brand | Simpson Strong-Tie |
|---|---|
| Length | 225 mm |
| Model Name / No | WTS2-225 |
| Sold Per | Tie |
| Pieces per m² | 2.5000 |
| To suit cavity width | 76mm - 100mm |
| Wall Height Suitability | 15 m |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.
-
Simpson Strong-Tie Type 3 Stainless Steel Wire Wall Tie 300mmAvailable for deliveryAvailable for click & collect from
Available for click & collect
from Change BranchAvailable for delivery Extended lead times applyAvailable to order for collection from Change Branch Extended lead times applyOut of stock for delivery
Out of stock for click & collect Change Branch
£0.60 Ex VAT per Tie£0.72 Inc VAT per Tie£0.60 Ex VAT£0.72Inc VAT -
Simpson Strong-Tie Galvanised Frame Tie 200mmAvailable for deliveryAvailable for click & collect from
Available for click & collect
from Change BranchAvailable for delivery Extended lead times applyAvailable to order for collection from Change Branch Extended lead times applyOut of stock for delivery
Out of stock for click & collect Change Branch
£0.85 Ex VAT per Tie£1.02 Inc VAT per Tie£0.85 Ex VAT£1.02Inc VAT -
Simpson Strong-Tie Galvanised Frame Tie 150mmAvailable for delivery
Available for click & collect from
Available for click & collect
from Change BranchAvailable for delivery Extended lead times applyAvailable to order for collection from Change Branch Extended lead times applyOut of stock for delivery
Out of stock for click & collect Change Branch
£0.56 Ex VAT per Tie£0.67 Inc VAT per Tie£0.56 Ex VAT£0.67Inc VAT -
Simpson Strong-Tie A35E Framing AnchorAvailable for deliveryAvailable for click & collect from
Available for click & collect
from Change BranchAvailable for delivery Extended lead times applyAvailable to order for collection from Change Branch Extended lead times applyOut of stock for delivery
Out of stock for click & collect Change Branch
£1.70 Ex VAT£2.04 Inc VAT£1.70 Ex VAT£2.04Inc VAT -
Stainless Steel Cavity Wall Tie 300mmAvailable for deliveryAvailable for click & collect from
Available for click & collect
from Change BranchAvailable for delivery Extended lead times applyAvailable to order for collection from Change Branch Extended lead times applyOut of stock for delivery
Out of stock for click & collect Change Branch
£0.58 Ex VAT per Tie£0.70 Inc VAT per Tie£0.58 Ex VAT£0.70Inc VAT -
Simpson Strong-Tie Type 2 Stainless Steel Wire Wall Tie 275mmAvailable for delivery
Available for click & collect from
Available for click & collect
from Change BranchAvailable for delivery Extended lead times applyAvailable to order for collection from Change Branch Extended lead times applyOut of stock for delivery
Out of stock for click & collect Change Branch
£1.00 Ex VAT per Tie£1.20 Inc VAT per Tie£1.00 Ex VAT£1.20Inc VAT -
Simpson Strong-Tie Insulation Retaining ClipAvailable for deliveryAvailable for click & collect from
Available for click & collect
from Change BranchAvailable for delivery Extended lead times applyAvailable to order for collection from Change Branch Extended lead times applyOut of stock for delivery
Out of stock for click & collect Change Branch
£0.09 Ex VAT per Clip£0.11 Inc VAT per Clip£0.09 Ex VAT£0.11Inc VAT