A fibre‑cement compatible blade on a circular saw is commonly used, though boards can also be cut with a handsaw or jigsaw. Cutting should always be done in a dry, well‑ventilated area.
Low Maintenance Cedral Boards for Modern Facades
Cedral cladding is fibre cement planks designed to provide a durable, weather‑resistant finish for exterior walls. The range typically features both lap and click style boards, offering the choice between a traditional overlapping appearance or a modern flush finish. Cedral products are widely used in refurbishment projects as well as new builds, helping to protect external walls from moisture while giving a consistent, low‑maintenance façade.
These planks are commonly fitted as part of a ventilated rainscreen system, allowing airflow behind the boards to reduce moisture build‑up. Cedral works well alongside bold external treatments such as render, especially where contrasting finishes are needed to define architectural features. It also pairs naturally with soffits and fascias when completing roofline detailing, helping create a neat, continuous exterior.
Made from fibre cement, Cedral boards provide stable performance in changing weather and feature factory applied coatings in a wide range of colours. Their compatibility with aluminium trims, ventilation profiles and standard fixing accessories means they can be installed in a structured sequence with predictable results. Installation typically involves fixing vertical battens, ensuring ventilation gaps, and using starter profiles and closers to keep the cladding system secure and well‑finished.
Because fibre‑cement boards are resistant to rot, insects and UV exposure, they reduce the need for ongoing upkeep compared with timber alternatives. Their simple cutting and fixing requirements allow straightforward installation with standard tools, while compliance with recognised fire‑rating standards supports their use across a variety of domestic projects.
Cedral Cladding FAQ's
Yes. Cedral is designed for use within a ventilated rainscreen system. Leaving a continuous airflow path at the base and top of the installation helps prevent trapped moisture and improves long‑term performance.
Yes. Both lap and click systems can be fitted vertically, provided suitable battens and counter‑battens are used to maintain ventilation and secure fixing points.
Factory‑coated boards typically do not need repainting. Only cut edges or small scratches may require touch‑up paint, applied sparingly with a fine brush.
Common batten sizes include 50 × 38 mm for standard applications, with larger sections used at joints or in high‑wind locations. Battens should be fixed at no more than 600 mm centres unless installation guides specify otherwise.