Match the roof covering, ridge angle, profile, material and colour. Confirm compatibility with the dry-fix or mortar system being used.
Apex Coverings for Tiled and Slated Roofs
Ridge tiles close the meeting point of two roof slopes and give the apex a weathered finish. MacBlair stocks ridge units for tiled and slated roofs, including projects using mechanical dry systems or specified mortar details.
Match the ridge profile, angle, colour and material to the main covering. The roof pitch and ridge board detail affect fit, while hip applications can require different units or cutting. Plan end pieces, unions and junctions before ordering.
Secure the ridge in accordance with current mechanical-fixing requirements. Compatible dry ridge components can provide restraint and, in some systems, ventilation. Coordinate with slates and roof tiles, use the specified ridge fixings, and preserve any planned high-level airflow.
Ridge Tiles FAQ's
Modern standards require mechanical restraint rather than relying on mortar alone. Follow the roof and product specification.
Some profiles are approved for both ridges and hips, while others need dedicated hip units. Check pitch and fixing details before use.
Divide the measured ridge or hip length by the effective cover length, allowing for overlaps, junctions, end units and cuts.
Thermal movement, poor preparation, weak mortar and weather exposure can cause failure. Mechanical fixing still needs to meet the current roof specification.