Framing nailers use larger fasteners for structural timber work, while finish and brad nailers use slimmer nails for mouldings and lighter joinery. Choose only a tool and fastener combination approved for the application.
Powered Nailing for Fast Timber and Trim Fixing
Nail guns speed up repeated fixing in timber, framing and trim work. Tool and fastener must be selected together, because nail gauge, length, collation angle and head type vary between systems.
Check the intended application and substrate before choosing a model. Depth adjustment helps seat nails consistently without crushing the surface, while sequential firing offers deliberate placement. Follow the manufacturer's limits for fastener size and material.
For drilling pilot holes or installing screws alongside nailed work, explore drills and impact drivers. Keep eye protection on and disconnect the battery or air supply before clearing a jam.
Nail Gun FAQs
Check the tool’s specified gauge, length range, head type and collation angle. The nail must also suit the material thickness and required holding strength without emerging from the reverse side.
Sequential firing requires the nose and trigger to be operated in a set order for each nail. It supports deliberate placement; use only the firing mode and procedure described in the tool manual.
Only use fasteners whose dimensions and collation match the nail gun specification. Brand is less important than confirmed compatibility, but unsuitable nails can jam or feed incorrectly.
Stop work, disconnect the power source and follow the manufacturer’s jam-clearing procedure. Keep the nose pointed away from people and never probe the mechanism while it is energised.