A magnet fitted to the cabinet meets a steel plate on the door and holds it closed until pulled open.
Neat Magnetic Closures for Cabinets
Magnetic catches hold cupboard and cabinet doors shut while allowing quick pull-open access. A magnet meets a steel strike plate when the door closes, creating a neat closure without a projecting handle-operated latch.
Choose the holding strength to suit the door size and frequency of use. The magnet and plate must meet flat and square, because even a small gap reduces the hold. Other cabinet fittings are available in the cupboard locks and latches range.
Mark both parts with the door closed, then test before fully tightening the screws. A catch should hold the door, not pull it back into alignment. Repair loose hinges and door fittings first, or compare the full locks and latches selection for a more positive closure.
Magnetic Catches FAQ's
Use enough holding force for the door weight and movement, but avoid excessive pull on lightweight doors.
The magnet and strike plate may not meet squarely, the gap may be too large or the hinges may be loose.
Yes, when the fitting suits the cabinet and environment. Keep it clean and check for corrosion in damp areas.
Two catches can help on a larger or flexible door, provided both are aligned so they share the load.