No. Only use an identifiable, certified lifting eyebolt with a rated application, competent plan and the required inspection. General-purpose eyebolts may be for attachment only.
How Expansion Joint Components Support Brick and Block Construction
Eyebolts provide a looped attachment point for compatible fixing applications when the eye, thread and base connection suit the intended load. MacBlair groups this range within nuts, bolts and threaded fixings, making it easier to match the product to the wider task. Choose thread diameter, length, eye form, material, finish and stated rating for the application. An eyebolt sold for general restraint or attachment must not be assumed suitable for lifting people or loads.
Inspect the supporting structure and matching thread or anchor, then plan load direction. The eye should seat fully against the specified surface without improvised packing that changes how force enters the shank. For the next stage, matching nuts for threaded eyebolts can support a related part of the job. Tighten using the approved method without inserting bars through the eye for uncontrolled leverage or damaging the loop.
Eyebolts should be used with the material, load and working conditions in mind. Lifting work requires a certified, identifiable product selected and installed by competent people within its working load and angle limits. Never side-load an eyebolt unless its design explicitly permits it, and remove distorted, worn or corroded items from service. washers for specified assemblies may also be useful where the task extends beyond this category.
Keep markings legible, protect threads and inspect the eye, shoulder and shank before each critical use. Check ratings, fixings, working parts or material condition before reuse, and remove damaged items from service. anchors for compatible substrates helps complete the surrounding work without substituting one product for another. For non-lifting attachments, the substrate and anchor still determine capacity, so confirm the complete connection rather than relying on the eye alone.
Eyebolts FAQs
Many eyebolts are strongest in a specified axial direction and lose capacity under angled or side loading. Follow the product's angle limits and sling arrangement.
It must achieve the full engagement and seating specified by the manufacturer and design. Do not leave the shoulder floating above the surface.
Not unless the instructions permit a specific method. Uncontrolled leverage can distort the eye, damage threads or conceal over-tightening.
Check identification markings, eye shape, shoulder, shank and threads for wear, cracks, corrosion or distortion. Remove doubtful items from service.