Most applications only require basic tools such as a brush, roller or trowel. A mixing paddle may be useful when preparing slurry based coatings, and a utility knife can help shape any membrane sheets.
Practical Tanking Solutions for Moisture Sensitive Areas
Waterproofing and tanking products in this range provide protective barriers designed to stop water entering structures where moisture can cause long term damage. These solutions are commonly used on basements, retaining walls and other below‑ground areas, forming a continuous layer that resists hydrostatic pressure and prevents damp patches or water ingress. Many systems such as cement based coatings, liquid applied membranes and sheet membranes are compatible with concrete, masonry and blockwork, offering reliable coverage across varied substrates.
These products are often applied alongside structural elements such as Concrete Reinforcement to support below ground construction where water pressure is a concern. When used with drainage components from Land Drainage, tanking layers can form part of a wider moisture management approach by directing groundwater away from treated surfaces. They also work well with protection layers found within Gas Membranes & Accessories, particularly in areas where both moisture and ground gases need to be controlled.
In practice, tanking products are used to seal internal and external walls, floors and junctions before finishing materials are added. They are suitable for areas where persistent moisture is expected, including utility rooms, semi‑basements and other below grade spaces. Many coatings comply with recognised standards for structural waterproofing and can be applied by roller, brush or trowel, making them accessible for a range of projects. Their ability to bond to stable, prepared surfaces helps reduce the risk of peeling or failure, while their seamless finish supports long lasting moisture resistance.
Waterproofing & Tanking FAQ's
Many cementitious and liquid applied systems can be used on slightly damp substrates, but the surface must be clean, stable and free of loose material. Always ensure major leaks are stopped before application.
Drying times vary depending on product type and temperature, but most coatings need at least 24 hours before additional layers, backfilling or finishing materials are added.
Some surfaces benefit from a primer, particularly porous blockwork or dusty concrete, as it improves adhesion and creates a more uniform base for the waterproofing layer.
Yes, once the tanking layer has fully cured, insulation boards, screeds, render or finishes can be installed. Ensure compatibility with adhesives or fixings used in subsequent layers.