Measure the wall length, width and available projection, allowing for tiles and access panels. Check the manufacturer’s exact dimensions because nominal sizes can vary.
Bath Tubs for Family Bathrooms and Refurbishment
A bath often sets the footprint for the whole room. MacBlair stocks tubs for new bathrooms and replacement work, with sizes to suit different layouts. Measure the wall length at several heights and check the route into the room before choosing.
The position of taps, waste and overflow affects both installation and access for maintenance. Confirm whether tap holes are drilled or must be formed on site, then select compatible bath taps with a working pressure matched to the water system.
A shower over the bath needs a stable, well-sealed edge and enough standing room below the shower head. Pair the tub with bath panels and shower screens, and check that the screen can open without hitting furniture or sanitaryware.
Support the bath exactly as the manufacturer specifies and keep the waste connection accessible. A compatible bath waste trap must fit below the outlet, while the wider bathroom collection covers the remaining fittings.
Bath FAQ's
Usually taps are selected separately. Check whether the bath is drilled for tap holes, has marked drilling positions or needs wall-mounted brassware.
A panel covers the frame and plumbing on exposed sides. The number and type required depend on whether the bath sits in an alcove, corner or more open position.
No. Check screen width, height, hinge direction and the shape of the bath rim. The fixing wall must also be plumb and able to carry the screen.
Confirm floor support, leg or frame positions, waste access, tap connections and the finished wall line. Test all connections for leaks before fitting the panels.