An isolating valve commonly shuts off one appliance or branch. A stopcock is often used to shut off the main incoming supply.
Connectors, Shut-Off Valves and Stop Taps
A tap replacement often turns into a search for the right connector and a working shut-off point. MacBlair’s water-supply range brings together braided flexible tap connectors, isolating valves, stopcocks and thermostatic mixing valves. The visible products cover several pipe and thread sizes, so the existing connections should be measured before ordering.
Braided connectors bridge a fixed supply pipe and a tap tail where a rigid connection is awkward. An isolating valve lets one branch be turned off for maintenance; a stopcock controls the wider supply. The range includes brass and chrome isolating valves plus brass-to-brass and poly-to-brass stopcocks. Match a new fitting to the pipe material and connection type.
Check access to the main shut-off before starting work on bathroom taps or other outlets. A fitting intended for drinking water must have the necessary approval for its use, and flexible hoses should not be twisted or strained. MacBlair’s broader plumbing and heating section covers the other parts needed for a planned repair.
Water Supply FAQ's
Match the pipe connection, tap thread, hose length and approval to the installation. Allow a gentle bend without twisting.
The listed poly-to-brass models can join specified sizes, but check the exact fitting and pipe system instructions.
It blends hot and cold water to deliver a controlled outlet temperature when installed in a compatible system.
Yes. Locate and test the appropriate isolation point before disconnecting any water fitting.