Open a Credit or Self Build account
Register online to track your orders
Find your LOCAL Builders Merchant
Do you have a MacBlair trade account?
Pipe Cutters Benders produce square cuts and controlled bends when the tool matches the tube material, diameter and wall thickness. MacBlair groups this range within plumbing tools, making it easier to match the product to the wider task. A cutter should support the pipe without crushing it, while a bender must form the required radius without flattening or kinking the bore. Check stated capacity in millimetres and material compatibility before purchase.
Mark the finished length, allow for fitting insertion or bend take-up and support the tube. Tighten a wheel cutter gradually across several rotations rather than forcing it deeply on the first pass. For the next stage, measuring and marking tools can support a related part of the job. Deburr the cut internally and externally, keep swarf out of the system and make trial bends where exact alignment matters.
Pipe Cutters Benders should be used with the surface, material and working conditions in mind. Isolate and drain existing pipework before cutting. Keep fingers clear of rollers and formers, use enough clear space for handles and do not heat or bend tube unless the material and method permit it. wrenches and spanners for fittings may also be useful where the task extends beyond this category.
Clean cutting wheels, rollers and formers, then check for chips, flat spots or loose pivots. Check labels, fixings, working parts or material condition before reuse, and remove damaged items from service. soldering and brazing products helps complete the surrounding work without substituting one product for another. A correctly prepared pipe end protects seals and fittings, while a smooth bend reduces the need for extra joints and potential leak points.
Match the tool's stated diameter range and material compatibility to the pipe. Allow room to rotate the cutter where pipework is already installed.
Apply light pressure and increase it gradually after each rotation. Excessive tightening can deform the pipe, damage the wheel and leave a poor cut.
Burrs can damage seals, restrict flow and collect debris. Remove internal and external sharp edges without thinning or distorting the pipe end.
Use a former or bending tool sized for the exact tube and keep it aligned through the full movement. Respect the permitted minimum bend radius.
No. Pipe materials and wall thicknesses behave differently, and some systems must not be bent. Check both tool and pipe-system instructions before forming a bend.