Warmflow Kabin-Pak Plume Management Kit
Warmflow Kabin-Pak Plume Management Kit
(Approx. 3-5 working days)
Do you have a MacBlair trade account?
The Warmflow Kabin-Pak plume management kit is designed to redirect flue products from external HE boilers where a low-level terminal may cause interference with boundaries, pathways, or outdoor living spaces. By relocating the plume to a safer discharge point, the kit helps reduce nuisance vapour and meets installation requirements for restricted locations. The included diverter section connects directly to the FBF flue terminal, ensuring the boiler remains fully room-sealed.
This system uses 80mm black polypropylene pipework, allowing for lightweight handling and precise alignment when navigating around external features. The bends, extension and adjustable brackets shown in the Warmflow technical diagrams support a wide variety of routing options while maintaining correct fall and airflow. When used with an approved low-level flue kit, the plume system enhances the flexibility of oil boiler flues, particularly on external modular enclosures such as the Kabin-Pak.
Built to withstand outdoor exposure, the components are resistant to UV degradation and weathering. Secure mechanical joints ensure reliable performance over time, while the kit’s design allows installers to adjust the terminal height or direction to meet site-specific clearance rules.
Kit Components
- Diverter elbow
- 860mm plume extension
- 87° plume bend
- Terminal insert
- Adjustable wall brackets
- 45° plume bend
- Redirects flue plume safely from external HE boilers
- Designed specifically for Warmflow Kabin-Pak models
- Includes bends, extension and brackets for flexible routing
- Uses durable 80mm polypropylene for outdoor performance
- Must be used in conjunction with the FBF balanced flue kit
| Brand | Warmflow |
|---|---|
| Energy Rating | Not Selected |
| Connection Type | Mechanical push-fit / clamp |
| Diameter | 80 mm |
| Model Name / No | KPMK |
| Sold Per | Pack |
| Suitable For | Warmflow external Kabin-Pak boilers |
| Adjustment Range | 860mm extension (cut-to-fit) |
| Flue Type | Single-Wall |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.
The Warmflow Kabin-Pak plume management kit is designed to redirect flue products from external HE boilers where a low-level terminal may cause interference with boundaries, pathways, or outdoor living spaces. By relocating the plume to a safer discharge point, the kit helps reduce nuisance vapour and meets installation requirements for restricted locations. The included diverter section connects directly to the FBF flue terminal, ensuring the boiler remains fully room-sealed.
This system uses 80mm black polypropylene pipework, allowing for lightweight handling and precise alignment when navigating around external features. The bends, extension and adjustable brackets shown in the Warmflow technical diagrams support a wide variety of routing options while maintaining correct fall and airflow. When used with an approved low-level flue kit, the plume system enhances the flexibility of oil boiler flues, particularly on external modular enclosures such as the Kabin-Pak.
Built to withstand outdoor exposure, the components are resistant to UV degradation and weathering. Secure mechanical joints ensure reliable performance over time, while the kit’s design allows installers to adjust the terminal height or direction to meet site-specific clearance rules.
Kit Components
- Diverter elbow
- 860mm plume extension
- 87° plume bend
- Terminal insert
- Adjustable wall brackets
- 45° plume bend
- Redirects flue plume safely from external HE boilers
- Designed specifically for Warmflow Kabin-Pak models
- Includes bends, extension and brackets for flexible routing
- Uses durable 80mm polypropylene for outdoor performance
- Must be used in conjunction with the FBF balanced flue kit
| Brand | Warmflow |
|---|---|
| Energy Rating | Not Selected |
| Connection Type | Mechanical push-fit / clamp |
| Diameter | 80 mm |
| Model Name / No | KPMK |
| Sold Per | Pack |
| Suitable For | Warmflow external Kabin-Pak boilers |
| Adjustment Range | 860mm extension (cut-to-fit) |
| Flue Type | Single-Wall |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.