Unilin Thin‑R Roof/Floor PIR Insulation 25mm
Unilin Thin‑R Roof/Floor PIR Insulation 25mm
(Approx. 3-5 working days)
Do you have a MacBlair trade account?
Unilin Thin‑R Roof/Floor PIR Insulation 25mm is a rigid polyisocyanurate (PIR) board with composite aluminium foil facings on both sides. It is certified to EN 13165 and BBA approved for use in ground supported and suspended floors, as well as pitched roof applications.
The insulation board provides thermal conductivity of 0.022 W/mK and an R-value of approximately 1.14 m²K/W, making it suitable for improving thermal performance where space is limited.
Each board measures 1200mm × 2400mm, covering 2.88m². Installation is carried out in a staggered, break bonded pattern with tightly butted joints. Perimeter strips can be used to reduce thermal bridging and maintain insulation continuity.
- Low thermal conductivity of 0.022 W/mK
- Suitable for solid and suspended floors
- Underfloor Heating Compatible
- Lightweight & Easy to Install
- High Compressive Strength
| Brand | Unilin |
|---|---|
| Width | 1200 mm |
| Acoustic | No |
| Applicable Standards | BS EN 13165, BBA Approved |
| Coverage | 2.88 m² |
| Fire Rating | Class F |
| Fire Resistant | Yes |
| Length | 2400 mm |
| Moisture Resistant | Yes |
| R-Value | 1.14 m2K/W |
| Sold Per | Sheet |
| Thermal Conductivity | 0.022 W/mK |
| Thickness | 25 mm |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.
Unilin Thin‑R Roof/Floor PIR Insulation 25mm is a rigid polyisocyanurate (PIR) board with composite aluminium foil facings on both sides. It is certified to EN 13165 and BBA approved for use in ground supported and suspended floors, as well as pitched roof applications.
The insulation board provides thermal conductivity of 0.022 W/mK and an R-value of approximately 1.14 m²K/W, making it suitable for improving thermal performance where space is limited.
Each board measures 1200mm × 2400mm, covering 2.88m². Installation is carried out in a staggered, break bonded pattern with tightly butted joints. Perimeter strips can be used to reduce thermal bridging and maintain insulation continuity.
- Low thermal conductivity of 0.022 W/mK
- Suitable for solid and suspended floors
- Underfloor Heating Compatible
- Lightweight & Easy to Install
- High Compressive Strength
| Brand | Unilin |
|---|---|
| Width | 1200 mm |
| Acoustic | No |
| Applicable Standards | BS EN 13165, BBA Approved |
| Coverage | 2.88 m² |
| Fire Rating | Class F |
| Fire Resistant | Yes |
| Length | 2400 mm |
| Moisture Resistant | Yes |
| R-Value | 1.14 m2K/W |
| Sold Per | Sheet |
| Thermal Conductivity | 0.022 W/mK |
| Thickness | 25 mm |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.
Unilin Thin‑R Roof/Floor PIR Insulation 25mm is a rigid polyisocyanurate (PIR) board with composite aluminium foil facings on both sides. It is certified to EN 13165 and BBA approved for use in ground supported and suspended floors, as well as pitched roof applications.
The insulation board provides thermal conductivity of 0.022 W/mK and an R-value of approximately 1.14 m²K/W, making it suitable for improving thermal performance where space is limited.
Each board measures 1200mm × 2400mm, covering 2.88m². Installation is carried out in a staggered, break bonded pattern with tightly butted joints. Perimeter strips can be used to reduce thermal bridging and maintain insulation continuity.