Square Downpipe Bend 92.5 Degree White 65mm
Square Downpipe Bend 92.5 Degree White 65mm
(Approx. 3-5 working days)
Do you have a MacBlair trade account?
The 65mm 92.5-degree square downpipe bend is a directional fitting used within exterior rainwater drainage systems. It alters the route of a standard 65mm square downpipe by 92.5 degrees. This component is commonly installed at the base of a vertical drop to guide water into a drainage grid, or combined with another bend at the roofline to create a swan neck offset against the exterior wall.
Made from unplasticised polyvinyl chloride (uPVC), the fitting connects directly to square downpipes using a simple socketed push-fit mechanism. The straight pipe sections slot securely into the bend without requiring sealants or adhesives, ensuring a straightforward setup. This bend is fully compatible with standard
The uniform white finish is UV resistant, preventing colour fading and structural degradation from prolonged exposure to sunlight. Its smooth internal bore ensures a consistent water flow rate and reduces the likelihood of debris accumulating and causing blockages in the drainage run.
- Changes square downpipe direction by 92.5 degrees for offsets.
- Designed with a 65mm profile to fit standard square rainwater pipes.
- Made from lightweight uPVC to resist weathering and corrosion.
- UV-resistant white finish prevents fading from direct sun exposure.
- Socketed push-fit design allows rapid assembly without sealants.
| Brand | MFP |
|---|---|
| Colour | White |
| Model Name / No | ABS1W |
| Profile | Square |
| Material | uPVC |
| Angle | 92.5 ° |
| Diameter | 65 mm |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.
The 65mm 92.5-degree square downpipe bend is a directional fitting used within exterior rainwater drainage systems. It alters the route of a standard 65mm square downpipe by 92.5 degrees. This component is commonly installed at the base of a vertical drop to guide water into a drainage grid, or combined with another bend at the roofline to create a swan neck offset against the exterior wall.
Made from unplasticised polyvinyl chloride (uPVC), the fitting connects directly to square downpipes using a simple socketed push-fit mechanism. The straight pipe sections slot securely into the bend without requiring sealants or adhesives, ensuring a straightforward setup. This bend is fully compatible with standard
The uniform white finish is UV resistant, preventing colour fading and structural degradation from prolonged exposure to sunlight. Its smooth internal bore ensures a consistent water flow rate and reduces the likelihood of debris accumulating and causing blockages in the drainage run.
- Changes square downpipe direction by 92.5 degrees for offsets.
- Designed with a 65mm profile to fit standard square rainwater pipes.
- Made from lightweight uPVC to resist weathering and corrosion.
- UV-resistant white finish prevents fading from direct sun exposure.
- Socketed push-fit design allows rapid assembly without sealants.
| Brand | MFP |
|---|---|
| Colour | White |
| Model Name / No | ABS1W |
| Profile | Square |
| Material | uPVC |
| Angle | 92.5 ° |
| Diameter | 65 mm |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.