Simpson Strong-Tie Scrolled Hip Iron
calcPageSize())"
/>
Simpson Strong-Tie Scrolled Hip Iron
(Approx. 3-5 working days)


Do you have a MacBlair trade account?
The Simpson Strong-Tie HI4 Scrolled Hip Iron is a structural bracket designed to secure the lowest ridge tile at the base of a pitched roof hip. It acts as a mechanical stop to prevent tiles from sliding or dislodging, ensuring comprehensive compliance with BS 5534 requirements for modern roof installations.
The bracket is fixed directly to the hip rafter prior to laying the tiles. Installers use the two pre-drilled 6.3mm holes located on the flange to secure the iron with appropriate mechanical fasteners, providing a rigid anchor point for both dry-fix and mortar bedded systems.
Made from galvanised mild steel, the HI4 variant provides strong resistance to environmental corrosion. It measures 275mm in length with a material thickness of 4mm, integrating reliably with various
- Made from galvanised mild steel to provide long-term corrosion resistance.
- Measures 275mm in length to ensure deep and secure anchoring to the rafter.
- Features two pre-drilled 6.3mm holes to allow fast mechanical fixing.
- Features a 4mm material thickness to maintain structural integrity under load.
- Provides a mechanical stop for hip tiles to comply with BS 5534 regulations.
| Brand | Simpson Strong-Tie |
|---|---|
| Width | 27 mm |
| Length | 275 mm |
| Model Name / No | HI4 |
| Self Adhesive | No |
| Thickness | 4 mm |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
The Simpson Strong-Tie HI4 Scrolled Hip Iron is a structural bracket designed to secure the lowest ridge tile at the base of a pitched roof hip. It acts as a mechanical stop to prevent tiles from sliding or dislodging, ensuring comprehensive compliance with BS 5534 requirements for modern roof installations.
The bracket is fixed directly to the hip rafter prior to laying the tiles. Installers use the two pre-drilled 6.3mm holes located on the flange to secure the iron with appropriate mechanical fasteners, providing a rigid anchor point for both dry-fix and mortar bedded systems.
Made from galvanised mild steel, the HI4 variant provides strong resistance to environmental corrosion. It measures 275mm in length with a material thickness of 4mm, integrating reliably with various
- Made from galvanised mild steel to provide long-term corrosion resistance.
- Measures 275mm in length to ensure deep and secure anchoring to the rafter.
- Features two pre-drilled 6.3mm holes to allow fast mechanical fixing.
- Features a 4mm material thickness to maintain structural integrity under load.
- Provides a mechanical stop for hip tiles to comply with BS 5534 regulations.
| Brand | Simpson Strong-Tie |
|---|---|
| Width | 27 mm |
| Length | 275 mm |
| Model Name / No | HI4 |
| Self Adhesive | No |
| Thickness | 4 mm |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund



