Round Downpipe Branch 112.5° White 68mm
Round Downpipe Branch 112.5° White 68mm
(Approx. 3-5 working days)
Do you have a MacBlair trade account?
The 68mm round downpipe branch with a 112.5° angle (manufacturer reference: estimated as AY1W) is an essential integration component for complex exterior rainwater management systems. Designed to merge two separate 68mm round downpipe runs into a single vertical drop, this Y-shaped branch is typically used on properties where two roof slopes converge, or where a secondary gutter run needs to tie into the primary drainage pipe.
Formed from unplasticised polyvinyl chloride (uPVC), the branch features standard socketed push-fit connections. The incoming pipes slot cleanly into the top inlets, creating a firm and secure joint without the need for sealants or specialist adhesives. The 112.5-degree entry angle is specifically engineered to ensure a smooth, unrestricted convergence of rainwater, preventing turbulence and minimising the risk of debris build-up at the junction. It integrates perfectly into broader
The uniform white finish provides UV resistance, protecting the component from structural degradation, brittleness, and colour fading caused by continuous exposure to direct sunlight.
- Seamlessly merges two 68mm round downpipe runs into a single vertical pipe.
- 112.5-degree angle ensures smooth water convergence and prevents blockages.
- Socketed push-fit design allows rapid, tool-free assembly without sealants.
- Made from lightweight uPVC to resist weathering, rot, and corrosion.
- UV-resistant white finish prevents fading and structural brittleness from sun exposure.
| Brand | MFP |
|---|---|
| Colour | White |
| Model Name / No | AY1W |
| Profile | Round |
| Material | uPVC |
| Angle | 112.5 ° |
| Diameter | 68 mm |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.
The 68mm round downpipe branch with a 112.5° angle (manufacturer reference: estimated as AY1W) is an essential integration component for complex exterior rainwater management systems. Designed to merge two separate 68mm round downpipe runs into a single vertical drop, this Y-shaped branch is typically used on properties where two roof slopes converge, or where a secondary gutter run needs to tie into the primary drainage pipe.
Formed from unplasticised polyvinyl chloride (uPVC), the branch features standard socketed push-fit connections. The incoming pipes slot cleanly into the top inlets, creating a firm and secure joint without the need for sealants or specialist adhesives. The 112.5-degree entry angle is specifically engineered to ensure a smooth, unrestricted convergence of rainwater, preventing turbulence and minimising the risk of debris build-up at the junction. It integrates perfectly into broader
The uniform white finish provides UV resistance, protecting the component from structural degradation, brittleness, and colour fading caused by continuous exposure to direct sunlight.
- Seamlessly merges two 68mm round downpipe runs into a single vertical pipe.
- 112.5-degree angle ensures smooth water convergence and prevents blockages.
- Socketed push-fit design allows rapid, tool-free assembly without sealants.
- Made from lightweight uPVC to resist weathering, rot, and corrosion.
- UV-resistant white finish prevents fading and structural brittleness from sun exposure.
| Brand | MFP |
|---|---|
| Colour | White |
| Model Name / No | AY1W |
| Profile | Round |
| Material | uPVC |
| Angle | 112.5 ° |
| Diameter | 68 mm |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.