Round Downpipe Bend 112.5 Degree Grey 68mm
Round Downpipe Bend 112.5 Degree Grey 68mm
(Approx. 3-5 working days)
Do you have a MacBlair trade account?
The 68mm 112.5-degree downpipe bend is a core fitting used to change the direction of an exterior rainwater pipe. It connects to standard 68mm round downpipes to alter the water flow by 112.5 degrees. This component is frequently used in pairs at the eaves to create a swan neck offset, bringing the pipe flush against the exterior wall, or at the base of a vertical drop to direct rainwater into a ground drainage point.
Made from unplasticised polyvinyl chloride (uPVC), the fitting uses a socketed push-fit mechanism for a straightforward installation. The straight downpipe sections slot securely into the bend without requiring sealants or specialist adhesives. This bend integrates seamlessly into broader
The grey finish provides UV resistance, protecting the component from structural degradation and colour fading caused by direct sunlight. A smooth internal bore ensures a consistent water flow rate and reduces the chance of leaves or debris catching and causing blockages within the drainage run.
- Creates a 112.5-degree directional change for downpipe offsets.
- Designed with a 68mm diameter for standard round rainwater systems.
- Made from uPVC to offer resistance against weathering and corrosion.
- UV-resistant grey finish prevents fading from direct sun exposure.
- Socketed push-fit design allows rapid assembly without sealants.
| Brand | MFP |
|---|---|
| Colour | Grey |
| Model Name / No | AB2G |
| Profile | Round |
| Material | uPVC |
| Angle | 112.5 ° |
| Diameter | 68 mm |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.
The 68mm 112.5-degree downpipe bend is a core fitting used to change the direction of an exterior rainwater pipe. It connects to standard 68mm round downpipes to alter the water flow by 112.5 degrees. This component is frequently used in pairs at the eaves to create a swan neck offset, bringing the pipe flush against the exterior wall, or at the base of a vertical drop to direct rainwater into a ground drainage point.
Made from unplasticised polyvinyl chloride (uPVC), the fitting uses a socketed push-fit mechanism for a straightforward installation. The straight downpipe sections slot securely into the bend without requiring sealants or specialist adhesives. This bend integrates seamlessly into broader
The grey finish provides UV resistance, protecting the component from structural degradation and colour fading caused by direct sunlight. A smooth internal bore ensures a consistent water flow rate and reduces the chance of leaves or debris catching and causing blockages within the drainage run.
- Creates a 112.5-degree directional change for downpipe offsets.
- Designed with a 68mm diameter for standard round rainwater systems.
- Made from uPVC to offer resistance against weathering and corrosion.
- UV-resistant grey finish prevents fading from direct sun exposure.
- Socketed push-fit design allows rapid assembly without sealants.
| Brand | MFP |
|---|---|
| Colour | Grey |
| Model Name / No | AB2G |
| Profile | Round |
| Material | uPVC |
| Angle | 112.5 ° |
| Diameter | 68 mm |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.