Ideal Heating 45° Plume Bend Pair 60mm
Ideal Heating 45° Plume Bend Pair 60mm
(Approx. 3-5 working days)
Do you have a MacBlair trade account?
The Ideal 45° Plume Bend Pair is designed for use with Ideal plume management systems on condensing boilers. These 60mm bends redirect the plume discharge to avoid windows, walkways or structural projections when a standard horizontal terminal is not suitable.
The bends form part of a plume management arrangement within a Gas Boiler Flues installation, allowing the terminal to be repositioned safely while maintaining correct airflow. They connect via push-fit joints for fast assembly and secure fitting.
As a component of Ideal’s Flues & Flashings range, the bends support compliance with plume re-direction requirements and can be used in both new installations and retrofit adjustments.
- Includes two 45° plume redirection bends
- 60mm diameter for plume management systems
- Allows directional offset of plume terminal
- Push-fit design for quick installation
- Compatible with Ideal condensing boilers
| Brand | Ideal Heating |
|---|---|
| Angle | 45 ° |
| Connection Type | Push Fit |
| Connection Size | 60 mm |
| Diameter | 60 mm |
| Includes | 2 × 45° plume bends |
| Model Name / No | 203230 |
| Pack Quantity | 1 Per Box |
| Length Of Warranty | 2 Years |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.
The Ideal 45° Plume Bend Pair is designed for use with Ideal plume management systems on condensing boilers. These 60mm bends redirect the plume discharge to avoid windows, walkways or structural projections when a standard horizontal terminal is not suitable.
The bends form part of a plume management arrangement within a Gas Boiler Flues installation, allowing the terminal to be repositioned safely while maintaining correct airflow. They connect via push-fit joints for fast assembly and secure fitting.
As a component of Ideal’s Flues & Flashings range, the bends support compliance with plume re-direction requirements and can be used in both new installations and retrofit adjustments.
- Includes two 45° plume redirection bends
- 60mm diameter for plume management systems
- Allows directional offset of plume terminal
- Push-fit design for quick installation
- Compatible with Ideal condensing boilers
| Brand | Ideal Heating |
|---|---|
| Angle | 45 ° |
| Connection Type | Push Fit |
| Connection Size | 60 mm |
| Diameter | 60 mm |
| Includes | 2 × 45° plume bends |
| Model Name / No | 203230 |
| Pack Quantity | 1 Per Box |
| Length Of Warranty | 2 Years |
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.