Altecnic Dirtmag Prime Compliance Pack 28mm
Altecnic Dirtmag Prime Compliance Pack 28mm
(Approx. 3-5 working days)
Do you have a MacBlair trade account?
The DirtmagPrime™ body tee and dirt separator chamber is manufactured from glass fibre re-inforced polyamide 66 with a high density polyethylene internal filter element and external magnet.
The magnet is positioned around the body below the flow line for improved collection of ferrous particles.
The conventional method is to position the magnet inside the collection chamber but the DirtmagPrime™ has the magnet positioned around it, helping to maintain a low pressure loss. The union joint between the body tee and separator body makes the DirtmagPrime™ suitable for installation in horizontal, vertical or inclined pipes.
Supplied with:
- Two ball isolating valves complete with swivel joint and compression end complying with BS EN 1252-2 for use with R250 (half hard) copper tube.
- Hose union ball blow down valve and manual air vent.
- Pack includes cleaner and inhibitor. Inhibitor protects the system while the cleaner helps clear the system of all old debris Valves allow isolation of system during service
Size: 28mm
MPN: 114-1011
| Flue Included | No |
|---|
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.
The DirtmagPrime™ body tee and dirt separator chamber is manufactured from glass fibre re-inforced polyamide 66 with a high density polyethylene internal filter element and external magnet.
The magnet is positioned around the body below the flow line for improved collection of ferrous particles.
The conventional method is to position the magnet inside the collection chamber but the DirtmagPrime™ has the magnet positioned around it, helping to maintain a low pressure loss. The union joint between the body tee and separator body makes the DirtmagPrime™ suitable for installation in horizontal, vertical or inclined pipes.
Supplied with:
- Two ball isolating valves complete with swivel joint and compression end complying with BS EN 1252-2 for use with R250 (half hard) copper tube.
- Hose union ball blow down valve and manual air vent.
- Pack includes cleaner and inhibitor. Inhibitor protects the system while the cleaner helps clear the system of all old debris Valves allow isolation of system during service
Size: 28mm
MPN: 114-1011
| Flue Included | No |
|---|
- Delivery cost will be calculated at checkout once delivery address has been confirmed
- Delivery lead times are an estimate only
- Delivery drivers will always prioritise safety over convenience when offloading materials
- Bagged products such as cement and plaster cannot be returned once opened
- Jumbo bags cannot be returned once delivered
- All other goods may be returned within 3 months with a proof of purchase provided
- Chargeable pallets may be returned for a full refund
- All online pricing is specific to Northern Ireland only. Pricing for our Isle of Man branch may vary.