Details

Expansion Vessels are commonly used on pumped systems to remove the requirements of a continuous pump. This works as the user will set a low and high pressure on the pump settings, when the water pressure reaches the lowest setting the pump will engage and ll the Expansion Vessel to the high pressure point and stop. Once this cycle has been completed the Expansion Vessel puts the stored water under pressure ensuring higher pressure water. This will continue until the Expansion Vessels pressure drops to the lower point and the pump starts its cycle again.

TUCSON® Expansion Vessels also come with a replaceable WRAS approved membrane.

Warranty TUCSON® Expansion Vessels are sold with a 2 year warranty eective from date of purchase. This warranty covers any manufacturing fault which may cause the vessel to fail and not perform its designed operations correctly. The warranty is valid on the assumption the following has been applied to the installation:

• Product installed correctly and used as specified in the instructions.

• It has been installed by a fully qualified tradesperson.

• The installation complies with the local building regulations and also any regulations which are relative to expansion vessel installations.

Specification:

Capacity: 35 Litre

Dimensions: 350mm Diameter x 450mm Height

Pre Charge Pressure: 2 bar

Min/Max Operating Temperature: -20deg C / 100deg C

Connection: 3/4"

Man Code: 7104224

EAN: 5391526423363